Noob brake question
01-Mar-2008 | 09:23 AM
#1
Thread Starter
Senior Member
Joined: Jan 2008
Posts: 163
Noob brake question
The car - 92 Civic hatch, with stock brakes.
Any difference between stock civic front brakes, compaired to say a 1995 Integra base model?
And GSR calipers and rotors, are they a straight swap onto civic spindles??
Any difference between stock civic front brakes, compaired to say a 1995 Integra base model?
And GSR calipers and rotors, are they a straight swap onto civic spindles??
04-Mar-2008 | 03:11 PM
#2
Member
Joined: Oct 2007
Posts: 95
From: Vancouver, BC
the civic hatches got the smaller 9.5" rotor fronts. the Si coupe and the EX-V 4-door's of the same year got the 10.3" fronts.
the integra fronts are also 10.3" rotors but the caliper is slighter better. keep in mind that ALL integra's (except type r) have the exact same calipers. the part numbers are identical for the RS/LS/GS and GSR for the DC2 years.
the Integra brakes will swap onto the fronts ONLY if you have the Si coupe/EX-V sedan front knuckles. so for your car, i would say no, they will not swap on unless you get the entire knuckle off an integra.
the integra fronts are also 10.3" rotors but the caliper is slighter better. keep in mind that ALL integra's (except type r) have the exact same calipers. the part numbers are identical for the RS/LS/GS and GSR for the DC2 years.
the Integra brakes will swap onto the fronts ONLY if you have the Si coupe/EX-V sedan front knuckles. so for your car, i would say no, they will not swap on unless you get the entire knuckle off an integra.
Thread
Thread Starter
Forum
Replies
Last Post
