Cant figure out how to take shifter knob off..
#1
Cant figure out how to take shifter **** off..
I got a 90 civic hatch and cant figure out how to take the shifter **** off. Im not used to civics. there is no screw or anything that i can see that holds it on. Do i have to remove the center consol or anything just to take it off? I have a shifter shifter and **** i want to install.
#2
Unless I'm stupid, I'm assuming it's a stick shift you're looking at.
You should be able to simply unscrew the **** right off. You shouldn't have to resort to removing the console just to get the **** off. I'm pretty sure it's just a simple lefty-loosey unscrew...
But really what do I know, I'm just runnning a slushbox lol
You should be able to simply unscrew the **** right off. You shouldn't have to resort to removing the console just to get the **** off. I'm pretty sure it's just a simple lefty-loosey unscrew...
But really what do I know, I'm just runnning a slushbox lol
#5
IT should be able to screw right off... someone must've really given it a good tightening... if you're not too concerned with marking it up, you could always take a monkey wrench and just keep turning lol
Not sure what else to say...
Not sure what else to say...
#7
i agree tighten it a little then start loosing it off to the left. it might be a lil stuck but will come off eventually.
#8
#19
Turning counter-clockwise?
Pliers probably won't go around the ****.
Channel-locks will, also, wrap the **** with a towel that you've doubled up so that the teeth of the pliers/channel-locks don't damage the ****.
Don't forget to top up the **** fluid while you have it off...
Pliers probably won't go around the ****.
Channel-locks will, also, wrap the **** with a towel that you've doubled up so that the teeth of the pliers/channel-locks don't damage the ****.
Don't forget to top up the **** fluid while you have it off...