does any1 know how to remove the stock headlight on a 95 civic hatch? thanks in advance for those who can help.

 

you'll need to take off the front bumper, then u will see where it is all bolted up

 

Remove the front bumper with the 5 screws at the top, 1 10mm bolt in each fender and 2 10mm bolts under the bumper. Once the bumper is removed, there are 2 10mm bolts on top of each headlight, 1 10mm bolt on the outside of each headlight (under the front of the fender) and there is a 10mm bolt that must be loosened on the inside part of the headlight (towards the centre on the car) that is reached via a hole Honda cut out in the rad support. Then, there is a bracket that holds the headlight in place on the front bumper support which has 2x10mm bolts for each headlight.

Its a pain, but very simple to do.

 

Thanks for the help guys. im just having probs now with the 5 screws on the bumper because its stuck but ill drmml a deeper slot into it then try again. im buying a one peice so im checking now how to take it out and put the projectrs in. thanks for the help. HAPPY NEW YEAR to all

 

i used gra-bit bits, to get them off and now they are loose enough for me to take off and on when doin work, otherwise they will get rounded when trying to get them off bc of rust and all

 

wer can i get these gra-bit? i saw the pict at the net but i ddnt see any at canadian tire online brochure. thanks again for the help

 

canadian tire has them
they had a sale on them for like 8.99

Reg was 19.99
i doubt the sale is still on
but give it a try

FOR SURE CC has it
causei grabbed 2 sets of them