FS: ON CA, Thermal R&D Catback Exhaust For 90- 91 Integra
14-Jul-2004, 08:52 PM
#1
Registered User
Thread Starter
Join Date: Aug 2003
Location: London, ON Canada
Posts: 214
FS: ON CA, Thermal R&D Catback Exhaust For 90- 93 Integra
Well I got this exhaust used a month back have had it on my car for about 3 weeks. To start I liked the sound of it and well not i kinda dont. So I think I am going to sell it. Its a Thermal R&D Classic Part# B111-C108 for a 90-93 Acura Integra(http://www.thermalrd.com/acura.htm) whish the mid pipe was still that shiny was but stainless steal when heated does turn coperish, the muffler is still nicce and clean like the photo! The only real problem with the exhaust is the dint in the muffler thats it. I purchased it like that not knowing but does not hurt the performance, cant really see it when you look at the car from a distance ony when you look under the car. I put a silencer on it to try and quiet the exhaust down a bit since I was getting complaints. SO since I was unable to find an oddball 3 5/8 sized silencer I just took a 4" silencer and cust the fringe flat off and screwed the silencer inside the exuast, the screws DID not go through the outsided so the silencer can be removed and you would not tell there was one! I will post pics of it, its still on my car. Starting price is $525CDNobo, unit sells new for over 500US! Contact me kwalsh24@execulink.com
14-Jul-2004, 09:06 PM
#3
Registered User
Thread Starter
Join Date: Aug 2003
Location: London, ON Canada
Posts: 214
Thanks but i will take a real photo of the wxhaust to show its condition, its in good condition sep for the underside of the muffler, other then that its good to go. I wanted performace upgrade but stock or low low low sound.....
BTW This has a 2.25" pipe I believe.
BTW This has a 2.25" pipe I believe.
15-Jul-2004, 04:16 PM
#5
Registered User
Thread Starter
Join Date: Aug 2003
Location: London, ON Canada
Posts: 214
Here are some photos of the exhaust. Took the rear end part off today to fix a leaky seal. Thanks E-mail me or respond if interested, but e-mail is the key!
AUDIO CLIP! It sound crappy my camera does not have a very good mic on it. But theres more to the actual exhaust then that, this clip is also take without the silencer on..... my car is also 100% stock just bolted the catback on everything else up is stock, so that also may change the sound of the exhaust. clip starts at idle, revs up to about 4000rpm and back down to idle....
http://www.execulink.com/~swalsh1/exhaust/catback.mp3
AUDIO CLIP! It sound crappy my camera does not have a very good mic on it. But theres more to the actual exhaust then that, this clip is also take without the silencer on..... my car is also 100% stock just bolted the catback on everything else up is stock, so that also may change the sound of the exhaust. clip starts at idle, revs up to about 4000rpm and back down to idle....
http://www.execulink.com/~swalsh1/exhaust/catback.mp3
18-Jul-2004, 10:04 PM
#11
Registered User
Thread Starter
Join Date: Aug 2003
Location: London, ON Canada
Posts: 214
Ok I was getting some commentss about the tip, so I took somemore shots on the tip, Now what you see on the tip is muffler cement between the silencer and the tip. The silencer did not fit to begine with so I had to modify it. Even after that in areas there was blowby so I used some muffler cement to fix the problem.
22-Jul-2004, 11:13 AM
#13
Registered User
Thread Starter
Join Date: Aug 2003
Location: London, ON Canada
Posts: 214
$475CDN/$362US, comon send me some offers! Someone must want or need a good performance exhaust! i am getting to many complaints so I had to take it off and I need it gone since I dont have the room!
