Super Clean Eg...complete...possible Part Out....
#1
Super Clean Eg...complete...possible Part Out....
SELLING COMPLETE VEHICLE OR MAY PART OUT SOON>>>>
1992 honda civic si, vehicle is fully loaded, cold a/c, all power options including power windows, power locks w/keyless entry/alarm, roof, mirrors etc. Vehicle always stored in winter. I have put less than 30k on entire car since purchased in 99-2000. Pics do no justice, must see in person. Willing to trade for 2000 civic sir or 99 and up acura 1.6el + cash.
exterior:
- 2000 sir electron blue w/metallic (painted by teqnik autobody)
(over 3g's in paint alone, vehicle had very little rust to begin with, but all rust was cut out, pics can be provided) all emblems, license plate holes all shaved.
- wings west font lip (real thing, poly urethane)
- wings west rear lip
- custom fitted ek sides
- carbon fibre Option JDM hood (perfect fitment, weaves cf-
underneath aswell)
- oem foglights
- tyc one piece projectors
- tyc carbon fibre spoon style mirrors (powered)
- jdm rear spoiler (w/long led)
interior:
- sparco torino fully adjustable seats (black)
- sparco rails
- momo monte carlo wheel w/momo hub (black w/red stitch)
- jdm quick release adaptor
- momo shift ****
- mugen pedals (real thing)
- fields v tech controller
- autometer shift light (includes 8-10 rpm shift pills)
- reverse indiglo gauges w/amber needles
- optional center console
- optional rear speaker grills
audio:
- pioneer head unit deh 8500
- pioneer component set in front (tweeters, 6.5's)
- pioneer 6.5's in rear aswell w/tweeters
- pioneer 6x9's mounted on rear shelf
- optional 2-12 jl audio subs available
suspension/brakes:
- apex N1 full coilovers (fully adjustable)
- type r lca's
- front camber kit
- rear camber kit
- spoon front upper strut bar (real thing)
- spoon rear upper strut bar (real thing)
- rear lower tie bar
- gsr front calipers
- rear disc brakes
motor: b18c1 w/gsr lsd transmission.
motor has no more than 25k since it was fully built. motor was all built and assembled by Rick L. @ RT Motorsports. (papers can be provided) Mobile 1 used every 3k and only 94 octane was used (have all receipts). Motor was rebuilt from top to bottom, EVERYTHING was done.... t belt waterpump, seals, bearings etc. All internal motor work was done by L. & Bush. Vehicle was chipped and tune by Paul @ Neetronics.
- crower stage 2 cams
- crower titanium valve springs
- crower titanium retainers
- aem adjustable cam gears
- head ported and polished
- skunk 2 intake manifold
- itr throttle body
- custom cold air intake (w/bypass valve)
- aem fuel rail
- walbro fuel pump
- b&m fuel pressure regulator
- itr pistons
- knife edged crank (blue printed and balanced)
- spoon oil cap
- spoon rad cap
- spoon drain plugs (magnetic)
- jdm itr red valve cover (mooncut for cam gears)
- spoon headers
- full genie turbo exhaust (very quiet)
- magnaflow high flow cat convertor
- gsr lsd transmission
- itr clutch
- itr lighted flywheel
this has been my project for the last 5 yrs and is finally completed...do not really want to sell my baby but getting married......not in a rush to sell.... if your SERIOUS than pm me, lowballers will be ignored....this vehicle may be parted out.....so stay tuned.... pics to follow....
1992 honda civic si, vehicle is fully loaded, cold a/c, all power options including power windows, power locks w/keyless entry/alarm, roof, mirrors etc. Vehicle always stored in winter. I have put less than 30k on entire car since purchased in 99-2000. Pics do no justice, must see in person. Willing to trade for 2000 civic sir or 99 and up acura 1.6el + cash.
exterior:
- 2000 sir electron blue w/metallic (painted by teqnik autobody)
(over 3g's in paint alone, vehicle had very little rust to begin with, but all rust was cut out, pics can be provided) all emblems, license plate holes all shaved.
- wings west font lip (real thing, poly urethane)
- wings west rear lip
- custom fitted ek sides
- carbon fibre Option JDM hood (perfect fitment, weaves cf-
underneath aswell)
- oem foglights
- tyc one piece projectors
- tyc carbon fibre spoon style mirrors (powered)
- jdm rear spoiler (w/long led)
interior:
- sparco torino fully adjustable seats (black)
- sparco rails
- momo monte carlo wheel w/momo hub (black w/red stitch)
- jdm quick release adaptor
- momo shift ****
- mugen pedals (real thing)
- fields v tech controller
- autometer shift light (includes 8-10 rpm shift pills)
- reverse indiglo gauges w/amber needles
- optional center console
- optional rear speaker grills
audio:
- pioneer head unit deh 8500
- pioneer component set in front (tweeters, 6.5's)
- pioneer 6.5's in rear aswell w/tweeters
- pioneer 6x9's mounted on rear shelf
- optional 2-12 jl audio subs available
suspension/brakes:
- apex N1 full coilovers (fully adjustable)
- type r lca's
- front camber kit
- rear camber kit
- spoon front upper strut bar (real thing)
- spoon rear upper strut bar (real thing)
- rear lower tie bar
- gsr front calipers
- rear disc brakes
motor: b18c1 w/gsr lsd transmission.
motor has no more than 25k since it was fully built. motor was all built and assembled by Rick L. @ RT Motorsports. (papers can be provided) Mobile 1 used every 3k and only 94 octane was used (have all receipts). Motor was rebuilt from top to bottom, EVERYTHING was done.... t belt waterpump, seals, bearings etc. All internal motor work was done by L. & Bush. Vehicle was chipped and tune by Paul @ Neetronics.
- crower stage 2 cams
- crower titanium valve springs
- crower titanium retainers
- aem adjustable cam gears
- head ported and polished
- skunk 2 intake manifold
- itr throttle body
- custom cold air intake (w/bypass valve)
- aem fuel rail
- walbro fuel pump
- b&m fuel pressure regulator
- itr pistons
- knife edged crank (blue printed and balanced)
- spoon oil cap
- spoon rad cap
- spoon drain plugs (magnetic)
- jdm itr red valve cover (mooncut for cam gears)
- spoon headers
- full genie turbo exhaust (very quiet)
- magnaflow high flow cat convertor
- gsr lsd transmission
- itr clutch
- itr lighted flywheel
this has been my project for the last 5 yrs and is finally completed...do not really want to sell my baby but getting married......not in a rush to sell.... if your SERIOUS than pm me, lowballers will be ignored....this vehicle may be parted out.....so stay tuned.... pics to follow....
#3
pending sales....
still would rather sell car complete...the following parts are now pending.......car will still be for sale for a much lower price without these parts....
- note: all parts are in practically new condition..still have boxes for all parts aswell...
- option jdm cf hood
- sparco torino fully adjustable seats (2x) complete w/sparco rails
- jdm type r moon cut valve cover
- fields v tech controller
- autometer shift light
- centre arm rest
- custom cold air intake w/bypass valve
- tyc one piece projectors
other items for sale.....
- spoon front upper strut bar
- spoon rear upper strut bar
- apex n1 fully adjustable coilovers (will come w/rear type r lca's)
- mugen pedals
- jdm universal quick release
- reverse indiglo white face gauges
- spoon style cf power mirrors
- note: all parts are in practically new condition..still have boxes for all parts aswell...
- option jdm cf hood
- sparco torino fully adjustable seats (2x) complete w/sparco rails
- jdm type r moon cut valve cover
- fields v tech controller
- autometer shift light
- centre arm rest
- custom cold air intake w/bypass valve
- tyc one piece projectors
other items for sale.....
- spoon front upper strut bar
- spoon rear upper strut bar
- apex n1 fully adjustable coilovers (will come w/rear type r lca's)
- mugen pedals
- jdm universal quick release
- reverse indiglo white face gauges
- spoon style cf power mirrors
#4
THANKS FOR ALL THE INTEREST, AND SORRY TO THOSE THAT I HAVE NOT REPLIED TO.....
- the following parts have been SOLD......
- spoon front upper strut bar
- spoon rear upper strut bar
- option jdm cf hood
- sparco torino fully adjustable seats (2x) complete w/sparco rails
- jdm type r moon cut valve cover
- fields v tech controller
- autometer shift light
- centre arm rest
- custom cold air intake w/bypass valve
- tyc one piece projectors
- ITEMS PENDING SALE:
- apex n1 fully adjustable coilovers (will come w/rear type r lca's)
- spoon style cf power mirrors
- jdm universal quick release
- ITEMS STILL AVAILABLE:
- mugen pedals
- reverse indiglo white face gauges
MORE PARTS WILL BE AVAILABLE.....
- the following parts have been SOLD......
- spoon front upper strut bar
- spoon rear upper strut bar
- option jdm cf hood
- sparco torino fully adjustable seats (2x) complete w/sparco rails
- jdm type r moon cut valve cover
- fields v tech controller
- autometer shift light
- centre arm rest
- custom cold air intake w/bypass valve
- tyc one piece projectors
- ITEMS PENDING SALE:
- apex n1 fully adjustable coilovers (will come w/rear type r lca's)
- spoon style cf power mirrors
- jdm universal quick release
- ITEMS STILL AVAILABLE:
- mugen pedals
- reverse indiglo white face gauges
MORE PARTS WILL BE AVAILABLE.....
Thread
Thread Starter
Forum
Replies
Last Post
imported_GHT
Honda Civic (+ other) Parts/Accessories for Sale or Trade
0
13-May-2007 05:13 PM
Joe-Civic95
Honda Civics (+ other) for sale
2
12-Mar-2007 05:01 PM
1sloweg
Honda Civic (+ other) Parts/Accessories for Sale or Trade
0
17-Nov-2005 01:53 PM
imported_blkzc
Honda Civic (+ other) Parts/Accessories for Sale or Trade
26
11-Jul-2004 12:51 PM
jdmEK9R
Honda Civic (+ other) Parts/Accessories for Sale or Trade
8
15-Mar-2004 12:17 PM