any one no if some one put a d16z6 92-95 si vtec motor in a crx be for i was thinking of doing it and how did it work out

 

Geeze man.. TOok me like 3 reads to figure out what you were asking. Ever heard of punctuation??

Anyways.

Yes you can put a D16Z6 in a crx. And it worked out well!

 

there are several ways to do it, and it works out well any way you do it.

you have Si?

you can just reuse your stock manifold and buy a VAFC to control the VTEC... or you can make your own VTEC controller.

Or you can get a OBD0-OBDI conversion harness and plug in a P28 ECU + a couple of wires.

 

ya Si

 

i can get the motor for like $200 with tranny but it is missing clutch, starter and dist. the motor has 184000 km on it

 

clutch you wanna change anyways.... starter you can buy new from Canadian tire... dist you can get from the classifieds or from the junk yards. $200 is an okay deal.

 

i just dont want it to be blown wen i buy it

 

well, that's a risk you take whenever you buy something used

 

is there any way to look or tell

 

leak down test

 

what is that

 

http://www.racerpartswholesale.com/long29a.htm

This should help.

 

the motor not in the car

 

bring someone w/ experience, cuz you haven't a clue

 

what can i look for

 

compression test and leakdown tests to begin with... that's pretty much all you can do.

 

thanks man

 

I'm gonna take a look at the same engine on Monday if you don't buy it by then. If you want I'll tell you what I think of it.

If you don't buy it I may. I have to replace my engine soon but I have time to wait.

 

who is selling the motor u are looking at

 

uhh he said the motor isn't in the car.. bring a 17mm socket and ratchet and try to spin the motor around by the lower crank pully and see if it turns, if you're afraid it's blown, but chances are the motor is going to burn oil unless it was well maintained from the begining. but good luck