is this doable? i was just browsing on the how to articles and it shows the one for 6th gen. what about us 5th gen guys ?sedan specifically. anyone done this? already have front strut bar,upper rear bar and lower tie bar. the lower tie bar didnt make a difference but i left it on anyway. if the rsb can be done im very interested. any info will be great thanks guys.

 

Should have no problems, I think Jugglez did this project on his 5th gen.

 

cool thanks for the reply. i know who to talk to now.

 

5th gen sedans (well, EX and I believe the LX too) had a rear swaybar already on them from the factory. If yours doesn't have one, it's just a matter of getting the lower control arms, swaybar and the other little parts you need. I know this because I'm putting a rear swaybar on my coupe and there's 3 sources for the LCAs: 93-96 del Sol Si, 94-01 Integra, 92-95 Civic 4-dr. EX.

 

mine is a 92 ex but didnt have one. howcome? i need new LCA's? i just bought a new one for the pass. side. but anyways im still gonna try and get it together.

 

The 5th gen US 4door EX had a OEM rear sway bar, the CDN specs didn't. Mine doesn't have one.

 

Oops!! My bad.:working:

 

duy sup man, do u have it on ur car? what about the front sway bar? did u use aftermarket pieces or from honda?

 

The EX-V model did. My old car had an OEM rear sway bar.

 

Yup it did come with a sway bar. Here's what you need:

Qty/Part #/Description
---------------------------------------
(1)52300-SR3-A01 sway bar
(1)52317-SR3-000 bracket (R)
(1)52318-SR3-000 bracket (L)
(2)52315-SK7-900 bushing
(2)52308-SR3-000 holder
(4)90007-SA7-000 bolt/washer
(2)52312-SE0-000 collar
(2)52316-SA5-000 bushing
(2)52303-SH3-020 link
(2)94103-10400 washer
(2)90120-SB0-003 bolt
(2)90176-SH3-003 bolt

Hope this helps.

 

ok lets say i got everything on that list.... im all set? its bolt on from there on? i guess i dont need to buy new LCAs. im thinking honda can provide me with instructions for installation like where the mounting points are, right?thanks junior for a ll da info.

 

Damn differences in model names between US and Canadian cars So does anyone know if the CDN EX sedans even had the endlink attachment points on the rear LCAs or was it limited to the EX-V?

 

Say I have a 93 HB. (does not have sway in rear).
1. What is needed so I can have it?
2. What cars did it come on, that would be a direct fit for my HB?
3. Same qestion for the front as well.

 

According to Honda the controll arms are different b/c the EX-V had ABS. The HB did not come w/ sway bars not even the Si models. The bar should fit w/ minor modification on sedans and hatches.

 

The most common source for this operation is 94-01 Integras. I would say that's your best bet for getting the LCAs. And if you find a place that has some available, let me know! Plazek Auto Recyclers weren't able to source any for me.