Honda Civic Performance - JDM Discussion Engine tech, forced induction, springs, shocks, brakes, tires, etc.

Steering wheel SHAKES BADLY.....

Thread Tools
 
Search this Thread
 
Old 28-Jul-2003 | 11:40 AM
  #1  
imported_Gatsby's Avatar
Thread Starter
Registered User
 
Joined: May 2003
Posts: 764
From: RichmondHill, Toronto
Angry Steering wheel SHAKES BADLY.....

HI.
I recently bought 16" rims and tires in very good condition.
There is no dents, scraches, or even marks on any of the rims.
Very nice and clean, and I paid some good money for it too.

Tires are OK too. Dunlops with about %75 left of front.
Now, when I go over 120Km/h, steering wheel starts to shake badly. Up and down vibrations that go through my hands and through my spine!!!!

This wasn't a big thing before, when I had my 13" Goodyear Integritys. I did need an alignment though, as the car was tending to go left all the time. There could have been some minor vibrations, but nothing that made me notice it......

The alignment problem is no longer there with the new rims and tires, however, I get this horrible shakes and vibration over 120 Kms/h

Car is a 93 DX Coupe. Well taken care of, 150,000 Kms and no power streeing.

Any thoughts everyone?
Old 28-Jul-2003 | 11:42 AM
  #2  
imported_94EG6HB's Avatar
Registered User
 
Joined: Apr 2002
Posts: 9,277
From: 43° 41' N 79° 38' W
Wheel weight..

Alignment...

Bent rim...

Old 28-Jul-2003 | 11:47 AM
  #3  
imported_Gatsby's Avatar
Thread Starter
Registered User
 
Joined: May 2003
Posts: 764
From: RichmondHill, Toronto
Rims are alloys and lighter than my steelies, if not equal in weight...

There are no curb marks or dents on the rims. Very clean and satisfying.... :-)

hmmmmmm... Alignment could be it, eh?
Old 28-Jul-2003 | 11:47 AM
  #4  
imported_JookSingKid's Avatar
Registered User
 
Joined: Apr 2002
Posts: 5,550
From: in the MOSH pit
sounds like you bought used rims and tires....

there are a number of possibities.

when tires get driven on, they start to wear, so they can have a left and right bias to them, especially on a lowered car where camber wear has developed. so you might have the tires that were previosly from the drivers side on passenger side.

tire balancing could also be the issue...

get you tires balanced, and check the tread for greater wear on outside vs inside of the tread.
Old 28-Jul-2003 | 11:49 AM
  #5  
imported_94EG6HB's Avatar
Registered User
 
Joined: Apr 2002
Posts: 9,277
From: 43° 41' N 79° 38' W
JSK advice is good..

He types faster than me..

Old 28-Jul-2003 | 11:50 AM
  #6  
imported_JookSingKid's Avatar
Registered User
 
Joined: Apr 2002
Posts: 5,550
From: in the MOSH pit
Originally posted by 94EG6HB
JSK advice is good..

He types faster than me..

and i eat alot of pizza!
Old 28-Jul-2003 | 11:53 AM
  #7  
imported_94EG6HB's Avatar
Registered User
 
Joined: Apr 2002
Posts: 9,277
From: 43° 41' N 79° 38' W
and drink a pissload of beer...

Old 28-Jul-2003 | 11:54 AM
  #8  
bbor-imported's Avatar
Senior Member
 
Joined: Apr 2003
Posts: 2,544
From: North York,Ontario
If it's none of the above,
Have a mechanic check the front end.
You may need ball joints.
Old 28-Jul-2003 | 11:55 AM
  #9  
imported_Gatsby's Avatar
Thread Starter
Registered User
 
Joined: May 2003
Posts: 764
From: RichmondHill, Toronto
The 2 front ones were previously mounted on rear, and have much more threat than the other 2. So I put them on front.

I didn't see any chamber wear, and the rubber seems to be evenly wore. ( R rated tires)

Tire balancing is a very good point...
Any idea how much it costs?

Hey thanks alot for helpful advice guys. Appretiated.
Old 28-Jul-2003 | 11:56 AM
  #10  
imported_94EG6HB's Avatar
Registered User
 
Joined: Apr 2002
Posts: 9,277
From: 43° 41' N 79° 38' W
Less than $20...

Old 28-Jul-2003 | 11:58 AM
  #11  
imported_Gatsby's Avatar
Thread Starter
Registered User
 
Joined: May 2003
Posts: 764
From: RichmondHill, Toronto
Ball joints sound painful.... hahaha.
It better be the balancing.
How much would the ball joints cost me?
I know that sooner or later I will come across those kindda things.
After all, my car is a 93 model with 150000 kms on it...
Old 28-Jul-2003 | 11:59 AM
  #12  
imported_Gatsby's Avatar
Thread Starter
Registered User
 
Joined: May 2003
Posts: 764
From: RichmondHill, Toronto
$20 for balancing the tires?
Where at?

How about alignment?
Old 28-Jul-2003 | 12:01 PM
  #13  
imported_94EG6HB's Avatar
Registered User
 
Joined: Apr 2002
Posts: 9,277
From: 43° 41' N 79° 38' W
Talk to Buddah..

Just noticed you weren't a paid member..

Might be a bit more for you..

He doesn't do alignment...


Old 28-Jul-2003 | 12:13 PM
  #14  
Nova_Dust's Avatar
Senior Member
 
Joined: May 2003
Posts: 18,367
From: Ontario
Alightment might be a little more costly then 20 bucks...
Old 28-Jul-2003 | 12:18 PM
  #15  
punkindrublic's Avatar
Senior Member
 
Joined: Apr 2002
Posts: 12,906
there is a tire shop near my house the balances wheels for $8 a tire.... i can't imagine it being much more then that
Old 28-Jul-2003 | 12:21 PM
  #16  
imported_Gatsby's Avatar
Thread Starter
Registered User
 
Joined: May 2003
Posts: 764
From: RichmondHill, Toronto
Balancing costs sound good.
Any idea with alignment costs?
Old 28-Jul-2003 | 12:23 PM
  #17  
imported_Torrey's Avatar
Registered User
 
Joined: Oct 2002
Posts: 3,657
From: Stoney Creek, Ontario
how old are you? By your posts you sound like a teenager.

Balancing should be no more than $40, ($10 per wheel), and alignment varies in price.

It sounds like your wheels are out of balance, maybe all the weights flew off. Mine did that, then I got it rebalanced, and they are out of balance again. Thankfully for me I rarely use t he hwy anymore so I can deal with it. Its because of stupid aluminum rims.

...and... JSK is the man! It was good meeting you last week!
Old 28-Jul-2003 | 01:36 PM
  #18  
Nova_Dust's Avatar
Senior Member
 
Joined: May 2003
Posts: 18,367
From: Ontario
So aluminum rims give such trouble more then regular steel rims?
Old 28-Jul-2003 | 01:52 PM
  #19  
imported_Torrey's Avatar
Registered User
 
Joined: Oct 2002
Posts: 3,657
From: Stoney Creek, Ontario
Yep, can't use weights because they aren't magnetic. So your left with either taping the weights or using glue.
Old 28-Jul-2003 | 05:09 PM
  #20  
imported_BoOsTd's Avatar
Registered User
 
Joined: Jul 2003
Posts: 4,508
From: Montreal
Alignment shouldnt cost more than 80$...65-75$ is very reasonable...Ive also heard of unbalanced/bent driveshaftes causing vibrations... Its likely tire balance tho...


Quick Reply: Steering wheel SHAKES BADLY.....



All times are GMT -4. The time now is 05:36 AM.