So i went to the wreakers today and go a bunch of things,found power mirrors and found some side markers for my car. Question is how would i wire up the power mirrors to me car,i have the switch for the mirrors and the plugs for the mirrors,but how do i go by wiring it you so it works??
Another questions is about my sidemarkers,can u have the side markers running all the time and even have them blink when u are making a turn or can they only be turned on all the time. How would i wire them. The lights i used to fit into the sidemarkers are from a 91 civic front headlight harness(cornerlights).
Looking for a little help for my project.
Thanks Evan

 

password JDM had the wiring harness for the pwr mirrors, and you can wire the side markings into you turn signals so that when u turn on your lights they will come on and then they will flash when u signal

 

If you want the sidemarkers to be at full brightness all the time and flash when the signal comes on then you can use a tail light convertor from crappy tire..... it's made for trailers but allows you to change from a 2-filament bulb system to a single filament bulb system.... ie 3 wire system to a 2 wire system.