imported_Vato_Loco

Hey,

I'm looking at Gallagher's GSR leather seats and I was wondering if the swap is a direct bolt on, I would really appreciate it.


Thanks,
Fred

imported_sane

hey vato loco,

how'd u get your car to move with no one driving it?

DumbasSi

Check thees links out. The front seats will bolt in if you swap the rails or just use 3 of the 4 mounting bolt holes. The rear seats don't look like they fit very well.
http://www.honda-tech.com/zerothread?id=565874
http://patriot.net/~merritt/seats.html

imported_Vato_Loco

I used photoshop...what do you think?


DumbasSi, thanks for the link....looks kinda difficult....

imported_nsr250

He put it in neutral and pushed it down a steep hill

Anyways , I put GSR fronts in my civic , just used 3 outta the 4 bolt holes. You'll notice no movement while driving only if some knucklehead sitting behind you decides to start pushing ur seats.

Gunmetalef

^^ not safe


but my friend has the rears.. and it fits ok he needs front though haha

imported_sane

tight

showcivic

vato_loco i have full gsr front & rear leather seats in my car ... the front seats do bolt in BUT you will have to change one rail for each seat ... you have to use the original civic seat belt rail and switch it over to the integra seat ...

Nova_Dust

Whoever drives with 3 bolts out of 4 are plain idoits.

Gallagher

guess i'm an idiot.......no1 would know unless i said something....

imported_Vato_Loco

Are the GSR seats that comfortable man?

DumbasSi

Think about this... You get in an accident and your passenger goes throught the windshield because the seats weren't bolted down correctly. The cops figure this out and charge you manslaughter or careless causing death. You go to jail and probably get suied(sp) by the person's family. Not worth it for a comfy set of seats.

98siG

just swap the rails thats what my buddy did he put gsr leather fronts in an ek works fine

imported_SICTOY

yep to swap the inner seat rail is noooo problem ...
no real excuse for not doin it, in order to have your seat in safely there must be a ll 4 bolts ...

Vato loco , the seats are well worth it !
the bolsters are way better than stock
with out getting into a racing seat, GS-R seats are pretty much the best IMO

Gallagher

yah, i just snapped a bolt in my drivers seat, i'll go through the window...


Seats are very comfy...

imported_GoldBadge

***Not trying to ruin Gallagher's Sale here***

But why don't you just find some EL Leathers?

Bombay

You can always drill new holes to have all four bolts. Very easy.

showcivic

gsr leather seats look better than el leathers

imported_twinbros

Josh and showcivic,
I am thinking of do this gsr swap as welll.
In addition of swaping over the civic seat belt side rail and rail support, don't you have to swap the other rail as well since there is a height difference between the civic and gsr rail
On to the right side rail. At left is a photo showing the Type R (top) and SiR (bottom) right side rails back to back. They are virtually identical except for one crucial element - the red arrows point to where the SiR rail is taller than the Type R rail. If you do not swap these rails, the Type R seat will sit uneven from left to right because of this difference in height.
Or does this only apply to ITR seats and not the GSR.

Thanks.

Tego

I only used the seatbelt side of the rails from stock seats onto my GSR leathers. With the driver side, you only have to fix the cable that allows the seat to move forward and backwards. It's just a 2min job, all you got to do is extend the cable and then bend it. You'll understand once you have seat right in front of you. Just let me know if you have anymore questions.