imported_dwiniarz

Hey whats up guy as you know I already asked how to install a deck in my car but now I got some indiglo guages and I am having touble installing them. The problem is taking the plasitc cluster that goes over the gauges, the black one not the clear one I tried to pull on it hard but it still won't come off I don't want to break it thats why I am wondering how to do it, can someone please help me out here, if you have pics that would be the best thing.


Thanks

StewPiddass

There are 3 tabs on the top that slide in and lock, you kinda need to push them all in at the same time and pull back, hard to explain, I just did mine last week.

imported_dwiniarz

I tried to do it but I just cant get it anyother help would be appreciated.

Thanks

Whiplash

it's probably sealed with a silicone or glue..
take a razor blade/sharp *** knife and cut along the seam..
then use a flat head screw driver to "gently" pry off the clear face..

imported_gatherer

there are tabs on the bottom that must be unclipped use a putty knife have fun

Whiplash

ain't that bad..
i had James' out and apart, installed and back in in about 1/2 hour.. (hardest part is pulling the dash..)

imported_dwiniarz

Thats what I am actually talking about sorry for not being so specific but the dash part I am having trouble with that. I have most of it off but it doesn't come off where the 4 ways button is, is that a srew there somewhere or is there just the 2.


Thanks

StewPiddass

there is a screw behind the hazard switch, don't just pull, take out the switch and then the screw first.

imported_dwiniarz

Thanks a lot

00 Civic SiR

I know how to get that off....

Under the 4 ways connector there is a clip built within the connector. Just lift the clip and it falls out. Trust me I've done it.